Tianjin Tisco Co.,Ltd

Widely used in construction, machinery, coal, chemical industry, railway vehicles, automotive industry, roads, Bridges, containers, sports facilities, agriculturalmachinery, petroleum machinery, prospecting machinery manufacturing industry.

Cold-rolled stainless steel coil
Grade:ASTM 304/304L/304N/304LN,UNS S30400/S30403/S30451/S30453,EN(BS) 1.4301/1.4306/1.4315,etc.
304 stainless steel plate rust resistance is better. Mainly used in: interior and exterior decoration of buildings, kitchen utensils, aviation machinery, building materials, automotive parts, kitchen utensils, knife machine parts, hospital utensils, etc., widely used, is a more common stainless steel plate.

Strength of stainless steel mills home direct supply, mass quality supply, the lowest price in the whole network, professional team to ensure quality.

Product specifications can be customized according to customer requirements

PRODUCT INTRODUCTION

buxiu=1.jpg


PRODUCTINFORMATIONPARAMETERPRODUCTINFORMATIONPARAMETER
Product Name:Stainless steel coilStandard:ASTM,AISI,JIS,GB, DIN,EN
Thickness:0.3-200mmSurface:BA,2B,NO.1,NO.4,4K,HL,8K
Length:2000mm, 2438mm, 3000mm, 5800mm, 6000mm,12000mm, etcCertification:ISO,BV
Width:40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, etcTechnique:Cold Rolled Hot Rolled
Grade(ASTM UNS)304、304L、321、316、316L、317L、347H、309S、310S、904L、S32205、2507、254SMOS、32760、S31703、S31603、316Ti、S31635、S31254、N08926、2205、S32205、S31008、S30908、S32750、S32760、630etcPrice Term:CIF CFR FOB EX-WORK
Grade (EN)1.4301,1.4307,1.4541,1.4401,1.4404,1.4571,1.4438,1.4539,1.4547,1.4529,1.4410,1.4501,1.4462,1.4845,1.4542,,etcPayment TermsT/T  L/C and Western Union etc
Packaging & Delivery
in bundle,plastic bags,thin film,wooden pallet,standard seaworthy export packing or as customer demands

20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)   

24-26CBM40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)   

54CBM40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)    68CBM


板面.jpg

SURFACECHARACTERISTICSUMMARY OF MANUFACTURING METHODAPPLICATION
NO.1Silvery whiteHot rolled to specified thicknessDo not need to have a glossy surface use
lackluster
NO.2DSilvery whiteAfter cold rolling, heat treatment and pickling are carried outGeneral material, deep material
NO.2BGloss is stronger than No.2DAfter No.2D treatment, the final light cold rolling is carried out through the polishing rollerThe general material
BAAs bright as a sixpenceNo standard, but usually a bright annealed surface with high reflectivity.Building materials, kitchen utensils
NO.3Rough lappingGrind with 100~200# (unit) strop tapeBuilding materials, kitchen utensils
NO.4Intermediate grindingPolished surface obtained by grinding with 150~180# strop abrasive tapeBuilding materials, kitchen utensils
NO.240Fine lappingGrinding with 240# strop abrasive tapekitchenware
NO.320Very fine grindingGrinding was carried out with 320# strop abrasive tapekitchenware
NO.400The luster is close to BAUse 400# polishing wheel to grindGeneral timber, building timber, kitchen appliances
HLHairline grindingSuitable particle material for hair stripe grinding (150~240#) with many grainsBuilding, construction material
NO.7It's close to mirror grindingUse a 600# rotary polishing wheel to grindFor art or decoration
NO.8Mirror ultrafinishThe mirror is ground with a polishing wheelReflector, for decoration


车间.jpg


检测.jpg

Carbon (C) : 1. Improve the deformation resistance and tensile strength of the blade;2. Enhance hardness and improve wear resistance. 
Cr (Cr) : 1. Enhance hardness, tensile strength and toughness;2. Anti-wear and corrosion. 
Cobalt (CO) : 1. Increase the hardness and strength so that it can withstand high temperature quenching;2. Used to enhance certain individual properties of other elements in more complex alloys. 
Copper (Cu) : 1. Enhance corrosion resistance;2. Enhance wear resistance. 
Manganese (Mn) : 1. Increase the quenchability, wear resistance and tensile strength;2.Removal of oxygen from molten metal by separate oxidation and separate vaporization;3. When added in large quantities, the hardness is enhanced, but the brittleness is improved. 
Molybdenum (Mo) : 1. Enhanced strength, hardness, quenchability and toughness;2. Improve machinability and corrosion resistance. 
Nickel (Ni) : 1. Enhance strength, hardness and corrosion resistance. 
Phosphorus (P) : Enhanced strength, machinability and hardness. 
2. When the concentration is too large, it is easy to crack 
Silicon (Si) : 1. enhanced ductility;2. Increase the tensile strength;3. Removal of oxygen from molten metal by separate oxidation and separate vaporization. 
Sulphur (S) : small amount used to improve machinability. 
Tungsten (W) : Increases strength, hardness and toughness. 
Vanadium (V) : Increases strength, hardness and seismic resistance. 


发货卷.jpg

RELATED PRODUCTS

MESSAGE

Submit
----------------------------------------------------------------